Konica Minolta bizhub PRESS C7000 - Manual (Page 148)

Tray Option
○ Right Binding—Trays 1, 2, or 3--Load cover
face down, top of cover must point to front of
machine
○ Right Binding—Bypass, Cover tray, PI1,
PI2--Load cover face up, top of cover must
point to front of machine
● Trim
● Don't bypass this job
● Clicking Shift Settings enables you to shift the
image on your cover horizontally and vertically.
Notes:
● If you select Auto in the Tray list, jobs that include specific booklet and
finishing options are sent to the appropriate output tray.
● To select the stacker auto tray, the stacker + stacker finisher must be
installed on the press.
● When the stacker + stacker finisher is installed, two stacker main trays
are automatically selected.
● When two stacker main trays are full, refer to the printer touch panel for
further instructions.
Parameter Option Description
Near-Line finisher Device Enables you to select one of the near-line finishing devices,
Duplo DC-645 or DSF-2000.
● Duplo DC-645 finisher cuts, slits, and creases
documents using registration marks and barcodes.
Note: A barcode is used only if you want to use a preset
job number. Otherwise, you can select it manually on
the Duplo DC-645.
● DSF-2000 finisher is a sheet feeder, that is configured
with a barcode reader.
End mark The Duplo DSF-2000 includes an end mark detector that
can detect collation and paper feed errors, and prevents
binding errors.
Print order Collated Prints a complete copy of the job before the first page of the
next copy is printed
Reverse print
order Sets the print order from back to front
Face up Delivers the job face up
Face down Delivers the job face down
Outside printing The printed side of the media is on the outside of the fold.
Inside printing The printed side of the media is on the inside of the fold.
138 Chapter 11—Job parameters