Scanning documents, Remote scan application, Installing the remote scan application in windows – Konica Minolta bizhub PRESS C7000 User Manual

Page 113

Advertising
background image

9

Scanning documents

Remote Scan Application

To scan a document, you first need to install the Remote Scan
Application (RSA) on your remote computer. Then you create a
scan box on the printer’s hard disk or use one of the default scan
boxes. The scan box acts as a folder for your scanned jobs. The
settings defined for the scan box determine where and in what
format the scanned jobs are saved. You can use the Remote Scan
Application (RSA) to create and manage custom scan boxes, and
in addition, retrieve scanned jobs saved in the IC-307 print
controller storage and save them on any remote computer on the
network. After you create a scan box, you can scan your document
on the 80 PPM press and 70/60 PPM press.

The predefined scan boxes are as follows:

Scan To Print. Jobs scanned to this box are automatically
submitted for printing.

Calibration. This box is used for off-the-glass calibration. The
calibration database on the IC-307 print controller is
automatically updated when files are scanned to this box.

Installing the Remote Scan Application in Windows

1. On the Windows desktop, select Start > Run.
2. In the Open box, type \\ followed by the host name, IP

address, or server name of the IC-307 print controller, and click
OK.

3. On the IC-307 print controller, locate the D:\Utilities\PC

Utilities folder.

4. Double-click the RemoteScan.exe file.

The RemoteScan Setup dialog box appears.

5. Click Next to accept the specified destination folder for the

Remote Scan Application (RSA) installation files.
The RSA is installed on your Windows computer.

6. Click OK.
7. Click Finish to restart your computer.

Advertising
This manual is related to the following products: