Konica Minolta bizhub PRESS C7000 - Manual (Page 89)

Printing a business card job
Use the step-and-repeat imposition method to print multiple copies
of the same business card on one press sheet.
Requirements:
This example assumes that your job contains one-sided business
cards that are 50 mm × 90 mm (1.96 in. × 3.54 in.), imposed on A3
(Tabloid) paper.
1. Click the suspend button to suspend the Process Queue.
2. From the File menu, select Import.
3. Import your business card file to the Print virtual printer.
The file is imported to the Process queue with a Waiting
status.
4. In the suspended Process queue, double-click the business
card file.
The job parameters window appears.
5. Click the Imposition tab.
6. In the Imposition method list, select Step & Repeat.
7. Select the Size parameter, and set the values as follows:
a. In the Paper size list, select Tabloid 11 x 17.
b. For Trim size, select Custom.
c. For H, type 1.96 inches or 50 mm.
d. For W, type 3.54 inches or 90 mm.
A preview of the layout is displayed below.
8. For Trim orientation, make sure that the Landscape option
is selected. To change the trim orientation, in the Job
Parameters window, select Print and then select Layout.
Select the desired orientation.
Printing a business card job 79