Konica Minolta bizhub 500 - Manual (Page 101)

2 Administrator Operations
2-82 500/420
Ad
minist
ra
to
r Op
er
at
ions
Chapter 2
<From PageScope Web Connection>
0 For the procedure to call the Network menu to the display, see steps 1
and 2 of “Changing the auth-password and priv-password” on
page 2-72.
1
Start the PageScope Web Connection and call the Network menu to
the display.
2
Click the [TCP/IP Setting] menu.
3
Select [Manual Setting] from the IP Address Setting Method pull-down
menu.
4
Enter the IP Address in the “IP Address” box.
– If [Auto Setting] is selected from the IP Address Setting Method
pull-down menu in step 3, select the means with which to acquire
the IP Address automatically, including DHCP, BOOTP, ARP/PING,
and AUTOIP setting.
5
Click the [Apply].
6
Click the [OK].
7
Click the [Logout].
420_security_E.book 82 ページ ２００７年３月７日 水曜日 午後３時１５分