Konica Minolta bizhub 500 User Manual

Page 22

Advertising
background image

Administrator Operations

2

500/420

2-3

Ad

minist

ra

to

r Op

er

at

ions

Chapter 2

2

Note

Make sure that none of the general users of the machine will know the
Administrator Password.

If the Administrator Password is forgotten, it must be set again by the
Service Engineer. Contact your Service Representative.

Do not leave the machine with the Administrator Setting mode setting
screen left shown on the display. If it is absolutely necessary to leave the
machine, be sure first to log off from the Administrator Setting mode.

While you are logging onto the Administrator Setting mode using Page-
Scope Web Connection, any operations from the machine’s control pan-
el are disabled.

When accessing the Administrator Setting mode from the control panel,
if you have already logged on to the Administrator Setting mode using
PageScope Web Connection, the machine displays a message that tells
not to turn off the power because of the remote operation being per-
formed and rejects any operation on the control panel. Wait until the mes-
sage disappears before attempting to access the Administrator Setting
mode once again.

When accessing the Administrator Setting mode from the control panel,
if [Export to the device] operation is being executed using the PageScope
Data Administrator, the machine displays a message that tells not to turn
off the power because of the remote operation being performed and re-
jects any operation on the control panel. Wait until the message disap-
pears before attempting to access the Administrator Setting mode once
again.

420_security_E.book 3 ページ 2007年3月7日 水曜日 午後3時15分

Advertising
This manual is related to the following products: