Konica Minolta bizhub 500 - Manual (Page 47)

2 Administrator Operations
2-28 500/420
Ad
minist
ra
to
r Op
er
at
ions
Chapter 2
7
From the keyboard and keypad, enter a new User Password that may
consist of 8 or more digits.
– Press the [C] key to clear all characters.
– Touch [Delete] to delete the last character entered.
– Touch [Shift] to show the upper case/symbol screen.
– Touch [Cancel] to go back to the screen shown in step 6.
8
Touch [OK].
? What happens if the User Password entered does not meet the re-
quirements of Password Rules?
% If the User Password entered does not comply with the Password
Rules, a message appears that tells that the User Password en-
tered cannot be used. Enter the correct User Password. For details
of Password Rules, see “Password Rules” on page 1-11.
9
To prevent entry of a wrong password, enter the User Password that
consists of 8 to 64 digits again.
– Press the [C] key to clear all characters.
– Touch [Delete] to delete the last character entered.
– Touch [Shift] to show the upper case/symbol screen.
– Touch [Cancel] to go back to the screen shown in step 6.
420_security_E.book 28 ページ ２００７年３月７日 水曜日 午後３時１５分