Konica Minolta bizhub 500 - Manual (Page 151)

3 User Operations
3-40 500/420
Use
r Op
er
at
ions
Chapter 3
– Touch [Delete] to delete the last character entered.
– Touch [Shift] to show the upper case/symbol screen.
– Touch [Cancel] to go back to the screen shown in step 3.
5
Touch [OK].
? What if there is a mismatch in the User Box Passwords?
% If there is a mismatch in the User Box Passwords, a message ap-
pears that tells that authentication has not been successful. The
machine then prohibits entry of the User Box Password for 5 sec.
Enter the correct User Box Password.
% If the Enhanced Security mode is set to [ON], entry of a wrong User
Box Password is counted as unauthorized access. If a wrong User
Box Password is entered a predetermined number of times (once
to three times) set by the Administrator of the machine or more, a
message appears that tells that authentication has not been suc-
cessful for any subsequent operation for authentication. The ma-
chine is then set into an access lock state, rejecting any more logon
attempts. To cancel the access lock state, the Administrator of the
machine must perform the Release Setting. Contact the Adminis-
trator of the machine.
6
Select any arbitrary file.
7
Select the target function.
– Selecting [Delete] will delete the specified file.
8
Press the [Start] key.
420_security_E.book 40 ページ ２００７年３月７日 水曜日 午後３時１５分