1 user authentication function, 1 performing user authentication, User operations – Konica Minolta bizhub 500 User Manual

Page 113: User authentication function -2, Performing user authentication -2, 3user operations

Advertising
background image

3

User Operations

3-2

500/420

Use

r Op

er

at

ions

Chapter 3

3

User Operations

3.1

User Authentication Function

When [ON (MFP)] or [ON (External Server)] (Active Directory) is set for Au-
thentication Method of the Administrator Setting mode, the User Authentica-
tion function implements authentication of the user of this machine before he
or she actually uses it through the User Password that consists of 8 to 64 dig-
its. During the authentication procedure, the User Password entered for the
authentication purpose appears as “*” on the display. When the Enhanced
Security mode is set to [ON], the number of times in which authentication
fails is counted.

2

Note

Before operating the machine, the user him/herself should change the
User Password from that registered by the Administrator of the machine.
For details of changing the User Password, see “Performing Change
Password” on page 3-8.
For more details of User Name and User Pass-
word, ask the Administrator of the machine.

If the User Password is changed by the Administrator of the machine dur-
ing operation of this machine, the user him/herself should immediately
change the User Password.

3.1.1

Performing user authentication

2

Note

Do not leave the machine while you are in the user operation mode. If it
is absolutely necessary to leave the machine, be sure first to log off from
the user operation mode.

Make absolutely sure that your User Password is not known by any other
users.

420_security_E.book 2 ページ 2007年3月7日 水曜日 午後3時15分

Advertising
This manual is related to the following products: