2 application functions overview, Application functions overview -4, Tr ansmission ap plicat ion s chapter 7 – Konica Minolta bizhub 360 User Manual

Page 117

Advertising
background image

7

Transmission Applications

7-4

Network Fax

Tr

ansmission

Ap

plicat

ion

s

Chapter 7

7.2

Application Functions Overview

The following function is displayed in the Scan Setting screen or the
Application screen.

*1

:

The displays are different depending on the country.

[Cancel]
Returns to the former screen.
[OK]
This is pressed when returning to the fax
screen.
[OFF]
Release the setting that has been set and
return to the preceding screen.
[Reset]
Turn off all the functions provided on the
screen.

Scan Setting screen

Application screen

Special Origi-
nal:

Mixed Origi-
nal

You can send document pages of mixed sizes in a single se-
quence of operations. (page 7-7)

Z-Folded
Original

You can send Z folded original because the ADF can determine
the document size properly. Some facsimiles cannot detect the
document size if it has been folded. (page 7-10)

Long Original

You can send originals longer than 432 mm. (page 7-13)

Bind Position:

Function to specify the stapling position of the original when
reading a double side original in the ADF and correct vertically
the rear face of the original. (page 7-16)

Frame Erase:

When transmitting pages in a book, this function allows you to
erase dark bands that would otherwise be reproduced in the
marginal areas of the transmitted pages. (page 7-19)

Background Adjustment:

Function to send a message after adjusting the density in the
background color of the original. (page 7-22)

TX Stamp

When transmitting a fax via the copier's ADF, a stamp can be
affixed to the pages of the document that have already been
scanned, allowing you to confirm that these pages have been
scanned. (page 7-25)

Scan Size:

This function allows you to designate the size of the document
to be transmitted. It is convenient when you intend to transmit
part of a page or pages. (page 7-27)

Header Setting

*1

:

When transmitting jobs by FAX, specify a method to attach the
Header Information for each job. (page 7-30)
[Header Setting] cannot selected depending on the country.

File Type:

For the Internet Fax/IP Address Fax, TIFF is fixed.

Advertising
This manual is related to the following products: