Konica Minolta bizhub 360 - Manual (Page 124)

Transmission Applications 7
Network Fax 7-11
Tr
ansmission
Ap
plicat
ion
s
Chapter 7
4
Press [Z-Folded Original].
– To release the setting, press [OFF].
5
Press [OK].
The Application screen will be restored.
6
Press [OK].
– To release the setting, press [Cancel].
The Scan Setting screen will be restored.
7
Press [OK].
The FAX screen will be restored.
8
Set other functions if necessary.
– See "Setting Transmission Conditions" on page 3-14 for
information about setting functions in the FAX screen. See
"Application Functions Overview" on page 7-4 for information
about setting functions in the Scan Setting or Comm. Setting
screen.
9
Designate the destination.
– See "Method for Specifying Addresses" on page 3-22 for
designating the destination.