Konica Minolta bizhub 421 - Manual (Page 35)

501/421/361 2-3
Control panel/touch panel 2
7 CAUTION
Do not apply extreme pressure to the touch panel, otherwise it may be scratched or damaged.
%
Never push down on the touch panel with force, and never use a hard or pointed object to make a
selection on the touch panel.
10 [Start] key Press to start scanning. When the machine is ready to start scanning, the
indicator on the [Start] key lights up in blue. If the indicator on the [Start]
key lights up in orange, scanning cannot be started.
Press to restart a stopped job.
11 Data indicator Flashes in blue while a print job is being received.
Lights up in blue when data is being printed.
12 [C] key Press to erase a value (such as the number of copies, a zoom ratio, or a
size) entered using the keypad.
13 Keypad Use to enter the number of copies to be printed.
Use to enter the zoom ratio.
Use to enter the various settings.
14 [Help] key Press to display the Help screen. The Help screen can display description
and operating procedure of each function.
15 [Enlarge Display] key Press to enter Enlarge Display mode.
When authentication is made with the PageScope Authentication Manag-
er, the change-over to the Enlarge Display is not available.
16 [Accessibility] key Press to display the screen for specifying settings for user accessibility
functions.
17 [Power Save] key Press to enter Power Save mode. While the machine is in Power Save
mode, the indicator on the [Power Save] key lights up in green and the
touch panel goes off. To cancel Power Save mode, press the [Power Save]
key again.
18 [Access] key In order to use this machine while the user authentication or account track
settings are applied, enter the user name and password (for user authen-
tication) or the account name and password (for account track), and then
press this key. Also press this key to log off.
19 [Brightness] dial Use to adjust the brightness (contrast) of the touch panel.
20 [User Box] key Press to enter User Box mode.
While the machine is in User Box mode, the indicator on the [User Box] key
lights up in green. For details on the box function, refer to the User’s Guide
[Box Operations].
21 [Fax/Scan] key Press to enter Fax/Scan mode.
While the machine is in Fax/Scan mode, the indicator on the [Fax/Scan]
key lights up in green.
22 [Copy] key Press to enter Copy mode. (As a default, the machine is in Copy mode.)
While the machine is in Copy mode, the indicator on the [Copy] key lights
up in green. For details, refer to the User’s Guide [Copy Operations].
No. Part name Description