Konica Minolta bizhub 421 - Manual (Page 145)

501/421/361 6-8
Useful functions (G3/IP/I-FAX) 6
6.6 Polling TX/RX (G3)
6.6.1 Polling TX
This function saves a document beforehand on the memory of this machine in order to enable transmission
of the document driven by the recipient-side instruction for polling. For the procedure for saving a document
in a Polling TX user box, refer to
"Polling TX - Normal" on page 4-67 .
!
Detail
While in the initial condition, documents saved after the completion of polling transmission are deleted.
However, it is also possible to leave the documents saved as they are after the completion of polling
transmission. For details of the procedure for settings, refer to
"File After Polling TX" on page 9-27 .
Documents subject to polling TX instructions are saved in a Polling TX user box among System user
boxes.
For polling transmission, only one document can be registered.
Memory TX is specified automatically.
This cannot be used with the following functions:
Polling RX
Timer TX
Overseas TX
ECM OFF
F-Code TX
Password TX
V. 34 OFF
Bulletin Registration
Bulletin Polling RX
6.6.2 Polling RX
This function enables a document saved or scheduled for polling transmission on the sender’s machine to
be transmitted upon a command from the recipient. This is convenient when the recipient desires to bear the
telephone charges. For the procedure for Polling RX, refer to
"Polling RX - Normal" on page 4-65 .
!
Detail
This cannot be used with the following functions:
Frame Erase
Scan Size
Separate Scan
Mixed Original
Z-Folded Original
Long Original
Binding Position
Confidential transmission
Relay request
Polling TX
Overseas TX
ECM OFF
Password TX
V. 34 OFF
Bulletin Registration
Bulletin Polling RX