Konica Minolta bizhub 421 - Manual (Page 233)

501/421/361 9-16
Administrator mode settings 9
9.4.5 System Settings - Reset Settings - Job Reset - Next Job - Reset Data After Job
For the setting procedure, refer to "System Settings - Stamp Settings - Header/Footer Settings" on
page 9-11 .
9.4.6 System Settings - Skip Job Setting - Fax
When the machine has run out of paper to print the receiving document or when the paper output tray
reaches the maximum load, specify whether the skip of the receiving job is permitted.
9.4.7 Fax Settings - Header Information
Register the sender address and fax number printed on the document received by the recipient.