8 fax settings - tx/rx settings, 9 fax settings - function settings, Memory rx setting – Konica Minolta bizhub 421 User Manual
Page 262: Activity report, Tx result report, Sequential tx report, Broadcast result report, Tx result report check, Network fax rx error report, Fax settings - tx/rx settings -45
501/421/361
9-45
Administrator mode settings
9
9.5.8
Fax Settings - TX/RX Settings
For the setting procedure, refer to
"Fax Settings - TX/RX Settings" on page 9-23
.
!
Detail
To enable the setting for [Print Paper Size], set [Tray Selection for RX Print] to "Auto".
The available tray types vary depending on the options that are installed.
9.5.9
Fax Settings - Function Settings
Function ON/OFF Setting - Destination Check Display Function
For the setting procedure, refer to
"Function ON/OFF Setting - Destination Check Display Function" on
Memory RX Setting
For the setting procedure, refer to
"Memory RX Setting" on page 9-30
9.5.10
Fax Settings - Report Settings - Output Settings
Activity Report
For the setting procedure, refer to
"Activity Report" on page 9-35
TX Result Report
For the setting procedure, refer to
"TX Result Report" on page 9-35
Sequential TX Report
For the setting procedure, refer to
"Sequential TX Report" on page 9-36
Broadcast Result Report
For the setting procedure, refer to
"Broadcast Result Report" on page 9-38
.
TX Result Report Check
For the setting procedure, refer to
"TX Result Report Check" on page 9-38
Network Fax RX Error Report
Specify the output setting for the network fax RX error report. Select the option to output or not to output.