Konica Minolta bizhub 421 - Manual (Page 51)

501/421/361 3-6
Registration of basic information 3
3.4 Using Web services
It is possible to give a scan command from a computer (Windows Vista/7/Server 2008) on the network or to
perform scanning according to the purpose from the machine and to send the scanned data to the computer.
This section describes settings that should be specified on the computer in advance.
3.4.1 Settings required for using Web services
The following settings are required for using Web services:
- Install the driver of the machine on the computer.
- Specify settings for Web services on the machine.
!
Detail
Settings for Web services on this machine can be specified in the Administrator Settings screen. For
details, refer to the User’s Guide [Network Administrator].
3.4.2 Installing the driver of this machine on the computer
Pre-installation checking
Before installation, check that "Network discovery" is enabled in [Network and Sharing Center] accessed
from [Control Panel].