Konica Minolta bizhub 421 - Manual (Page 96)

501/421/361 4-43
Transmitting data 4
4.5.8 Erase - Frame Erase
Select this setting [Frame Erase] to erase black shadow around the original document.
- To erase the same width on all sides, touch [Frame], and then specify a value (range: 1/16 to 2 inches
(0.1 to 50.0 mm)).
- To specify different widths for the top, left, right, and bottom, touch the button for the desired location,
and then specify a value.
- To cancel frame erasing, touch [No].
!
Detail
If a width to be erased around the original is specified with "Frame Erase" in the Book Copy screen, the
same settings are also applied to "Frame Erase" in the Frame Erase screen.
4.5.9 Book Scan - Book Copy
Select this method for scanning a page-spread original. In addition, the binding position and erasure of
unnecessary parts can be specified.
!
Detail
Specify the size of the page spread as the scan size.
Book Spread
Select this setting to scan a page spread as a single page.
Separation
Select this setting to scan a page spread as two separate pages (left and right).