Konica Minolta BIZHUB C652DS - Manual (Page 100)

bizhub C652/C652DS/C552/C552DS/C452 2-82
2.24 Sending and receiving IP address faxes 2
2.24 Sending and receiving IP address faxes
Configure settings to send and receive IP address faxes.
IP Address Fax means FAX that is available on the IP network. To send a fax, specify the IP address, host
name, or E-mail address of the remote machine.
The SMTP protocol is used to send and receive IP address faxes. Because the SMTP server function of this
machine sends and receives data, no server is required when sending or receiving a fax by specifying the IP
address of the remote machine. (However, the DNS server is required to send or receive a fax by specifying
the host name or E-mail address.)
This machine supports the following two IP address fax operation modes. Switch the operation mode
according to your environment.
- "Mode 1": This mode allows communication between Konica Minolta models capable of transmitting
IP address faxes, and between models compatible with the direct SMTP standard defined by CIAJ
(Communications and Information Network Association of Japan). However, because a unique method
developed by Konica Minolta is used to send a color fax, only the Konica Minolta models can receive
such a color fax. This machine can receive color faxes in any mode.
- "Mode 2": This mode allows communication between Konica Minolta models capable of transmitting
IP address faxes, and between models compatible with the direct SMTP standard defined by CIAJ
(Communications and Information Network Association of Japan). The method compatible with the
direct SMTP standard (Profile-C format) is used to send a color fax. This machine can receive color
faxes in any mode.
To use the IP Address Fax function, check the following.
- Install the optional fax kit FK-502 in this machine.
- To use the IP Address Fax function, ask your service representative to configure settings. For details,
contact your service representative.
Use the following flowchart to configure settings. Clicking a step jumps to the associated procedure.
d
Reference
For details on how to register IP address fax destinations refer to page 2-232.
For details on IP Address Fax, refer to the "User's Guide [Network Scan/Fax/Network Fax Operations]".
2.24.1 TCP/IP Settings
Configure settings to use this machine in the TCP/IP network environment.
For details, refer to page 2-6.
TCP/IP Settings
Network Fax Function Settings
SMTP TX Setting
SMTP RX Setting
Network Fax Settings
Header Information
Finish