Konica Minolta BIZHUB C652DS - Manual (Page 109)

bizhub C652/C652DS/C552/C552DS/C452 2-91
2.26 Printing (LPR/Port9100) 2
2.26 Printing (LPR/Port9100)
Configure settings for LPR or Port9100 printing.
LPR printing is performed via the network using the LPR protocol. It is mainly used in UNIX-based operating
systems.
Port9100 printing is performed via the network by directly specifying the RAW port (Port9100) of this machine
connected to the TCP/IP network as a destination printer.
Use the following flowchart to configure settings. Clicking a step jumps to the associated procedure.
d
Reference
For details on how to install the printer driver, refer to the "User's Guide [Print Operations]".
2.26.1 TCP/IP Settings
Configure settings to use this machine in the TCP/IP network environment.
For details, refer to page 2-6.
2.26.2 LPD Setting
In the administrator mode of PageScope Web Connection, select "Network" ö "TCP/IP Setting" ö "TCP/IP
Setting".
2.26.3 RAW Port Number
In the administrator mode of PageScope Web Connection, select "Network" ö "TCP/IP Setting" ö "TCP/IP
Setting".
Reference
- If you select [OK] after changing multiple port numbers together in PageScope Web Connection or on
the control panel, a port number duplication error may be displayed. When this error is displayed, first
change one port number and select [OK]. Then change another one and select [OK].
TCP/IP Settings
(1) LPR printing
(2) Port9100 printing
(1) (2)
LPD Setting RAW Port Number
Finish
Item Description Prior check
LPD Select "Enable".
Item Description Prior check
RAW Port Number Select the check box of the required port, and enter the
RAW port number.