Konica Minolta BIZHUB C360 - Manual (Page 21)

Security Function Ver. 1.02 Jul. 2010 8. Service Mode functions
17
bizhub C360/C280/C220
for PKI Card System
Security Function
3. Touch [CE Password].
4. Type the currently used CE password from the keyboard shown on the display and
touch [END].
NOTE
• If there is a mismatch in the CE Password between that currently set and that just
entered, the machine displays a message telling that the CE Password entered is
wrong. Enter the correct one.
• Each time a wrong CE password is entered, the CE password illegal access count
is incremented by one.
When the access to the Service Mode has been successful with the correct CE
password entered, the CE password illegal access count is cleared and reset to 0.
• When “Mode 2” is set for [Prohibited Functions When Authentication Error] as
accessed through [Administrator Settings]
 [Security Settings]  [Security
Details], the machine is set into an access lock state if a wrong CE password is
entered a predetermined number of times.
Then, access to the Service Mode cannot be made until the access lock state is
released.
For the procedure to release the access lock state, see P.5.
A0EDS1E035DA