Konica Minolta BIZHUB C360 - Manual (Page 30)

8. Service Mode functions Security Function Ver. 1.02 Jul. 2010
26
bizhub C360/C280/C220
for PKI Card System
Security Function
8.9 Administrator Unlocking function
• When Administrator authentication using the Administrator password is set into an
access lock state, this function may be used to release the access lock state.
• The access lock state for the Administrator password authentication can generally be
released by turning OFF and ON the main power switch and upon the lapse of the period
of time to be elapsed before the access lock state is released. This function, however,
overrides these events, allowing the access lock state to be released regardless of these
events.
8.9.1 Administrator Unlocking function procedure
1. Call the Service Mode to the screen.
See P.3
2. Press the following keys in this order to display the Enhanced Security screen:
Stop
0Clear
3. Touch [Administrator Unlocking].
4. Touch [Unlocking].
5. Check that “OK” appears on the screen and then touch [END].
A0EDS1E024DA
A0EDS1E040DA