Konica Minolta BIZHUB C360 - Manual (Page 16)

8. Service Mode functions Security Function Ver. 1.02 Jul. 2010
12
bizhub C360/C280/C220
for PKI Card System
Security Function
8. Service Mode functions
• The Service Mode is used to set various service functions.
8.1 Firmware Version
• This function is used to display the firmware version information of the machine.
When the Enhanced Security Mode settings are to be made, this function should be
used to check the firmware version number of the MFP Controller and the checksum
value against the security authentication version.
8.1.1 Checking the firmware version number
1. Call the Service Mode to the screen.
See P.3
2. Touch [Firmware Version].
3. Check the Firmware version number of MFP Controller and the checksum value using
firmware version number.
A0EDS1E103DA
A0ED0Y0-0100-GM0-30 111A