Konica Minolta BIZHUB C360 - Manual (Page 23)

Security Function Ver. 1.02 Jul. 2010 8. Service Mode functions
19
bizhub C360/C280/C220
for PKI Card System
Security Function
8.5 Initialization function
• The Data Clear function resets the current settings for various functions to the default
values.
• Since all subsequent data will be cleared, execute “Data Clear” function with care.
Once Data Clear has been executed, be sure to again designate the settings of
items whose data has been cleared.
(For the functions to be set in Administrator Settings, have the administrator make
the settings again.)
• After resetting the data or having the administrator make the settings again, con-
firm that the MFP is a properly operation status by referring to the Installation
Check List or User’s Guide.
A. Items cleared by Clear All Data function
Item Details
Ser
v
ice Mo
de/
Admin
istr
a
to
r S
e
tt
in
gs
CE password CE password is reset to “92729272.”
Administrator password Administrator password is reset to “1234567812345678.”
HDD Encryption Setting HDD Encryption Setting function is set to OFF.
Temporary Data Overwrite
Setting Temporary Data Overwrite Setting is set to [OFF].
Prohibit Functions When Auth.
Error Prohibit Functions When Auth. Error is set to [Mode2].
Secure Documents Access
Method Secure Documents Access Method is set to [Mode2].
(Linked to Prohibit Functions When Auth. Error)
FTP server function The following function is permitted.
• Print Data Capture
• Acquisition of VCM count data
Release Time Settings Release Time Settings is set to [5 min.].
Audit Log Settings Audit Log Settings is set to [No].
SNMP v1/v2c Write Setting of the SNMP v1/v2c Setting is set to “Invalid.”
SNMP v3 SNMP v3 Setting is set to “OFF.”
WebDAV server password WebDAV server password is reset to the default value (sysadm).
TCP Socket Settings TCP Socket setting is set to [OFF].
Network Setting The currently set network settings (DNS Server setting, IP
Address setting, SMTP Server setting, NetWare Setting, NetBIOS
setting and AppleTalk Printer Name setting) is cleared and reset
to the default setting.
SSL-compliant protocol
settings All are set to OFF.
System Auto Reset System Auto Reset is set to [1 min.].
OpenAPI Settings Access Setting is seto to [Allow].
PSWC Setting PSWC Setting is set to [ON].