2 access lock of service mode, 1 access lock release procedure, Access lock of service mode – Konica Minolta BIZHUB C360 User Manual

Page 9: Access lock release procedure

Advertising
background image

Security Function Ver. 1.02 Jul. 2010

6. Accessing the Service Mode

5

bizhub C360/C280/C220

for PKI Card System

Security Function

6.2

Access lock of Service Mode

• Use the following procedure to release the access lock state of the Service Mode.

Releasing the access lock state will also clear the illegal access count reached in CE
authentication.

6.2.1

Access lock release procedure

1.

Turn off the sub power switch/main power switch and turn it on again more than 10 sec-
onds after.

2.

Press the Utility/Counter key.

3.

Touch [Meter Count].

4.

Touch [Check Details].

5.

Touch [Coverage Rate].

6.

Press the following keys in this order:
Stop

09 3 1 7

(Performing this step will start the access lock release timer.)

7.

Once started, the access lock release timer measures time intervals.
The access lock state is released when the period of time set through [Service Mode]
 [Enhanced Security]  [Operation Ban release time] elapses.

See P.25

A0EDS1E023DA

Advertising
This manual is related to the following products: