Konica Minolta BIZHUB C652DS - Manual (Page 22)

bizhub C652/C652DS/C552/C552DS/C452 3-11
3.3 Installation using Add Printer Wizard 3
11
Change the settings according to the port, and then click [OK].
% For LPR connection, select "LPR", and then enter "Print" in the "Queue name" box.
% You must discriminate between upper and lower case letters when entering it.
% For Port 9100, select "Raw", and then enter a RAW port number (initial setting: "9100") in the "Port
Number" box.
12
Click [Next].
The "Install the printer driver" page appears.
13
Click [Have Disk].
14
Click [Browse].
15
Select a desired fax driver folder on the CD-ROM, and then click [Open].
% Select a folder according to the printer driver, operating system, and language to be used.
16
Click [OK].
The "Printers" list appears.
17
Click [Next].
18
Follow the instructions on the pages that follow.
% If the "User Account Control" window appears, click [Continue].
% If the "Windows Security" window for verifying the publisher appears, click "Install this driver
software anyway".
19
Click [Finish].
20
After finishing the installation, make sure that the icon for the installed printer is displayed in the
"Printers" window.
21
Remove the CD-ROM from the CD-ROM drive.
This completes the fax driver installation.
d
Reference
If both "RAW Port Number" and "LPD Setting" are enabled in the network settings for this machine, check
the enabled port, and then change it if necessary. For details, refer to the "User's Guide [Print Operations]".