Konica Minolta BIZHUB C652DS - Manual (Page 26)

bizhub C652/C652DS/C552/C552DS/C452 3-15
3.3 Installation using Add Printer Wizard 3
5
On the page for specifying how the printer is attached, select "Local printer".
6
Click [Next].
A page for selecting a port appears.
7
Click "Create a new port", and then select "Standard TCP/IP Port" as the type of port.
% In Windows NT 4.0, from the "Available Printer Ports" list, select "LPR Port", and then click [New
Port]. For details, refer to the "User's Guide [Print Operations]".
8
Click [Next].
"Add Standard TCP/IP Printer Port Wizard" starts.
9
Click [Next].
10
In the "Printer Name or IP Address" box, enter the IP address for this machine, and then click [Next].
% If the "Additional Port Information Required" dialog box appears, go to Step 11.
% If the "Finish" screen appears, go to Step 14.
11
Select "Custom", and then click [Settings].
12
Change the settings according to the port, and then click [OK].
% For LPR connection, select "LPR", and then enter "Print" in the "Queue name" box.
% You must discriminate between upper and lower case letters when entering it.
% For Port 9100, select "RAW", and then enter a RAW port number (initial setting: "9100") in the "Port
Number" box.
13
Click [Next].
14
Click [Finish].
"Add Printer Wizard" appears.
15
Click [Have Disk].
16
Click [Browse].
17
Select a desired fax driver folder on the CD-ROM, and then click [Open].
% Select a folder according to the printer driver, operating system, and language to be used.
18
Click [OK].
The "Printers" list appears.