Konica Minolta BIZHUB C652DS - Manual (Page 34)

bizhub C652/C652DS/C552/C552DS/C452 4-3
4.1 Sending a fax 4
% Change the communication mode if necessary.
ECM: Select the check box to use ECM (error correction mode). If the V.34 check box is selected,
you will not be able to clear this check box.
International Transmission Mode: Select the check box to send a fax at a lower speed for overseas
communication. Select this check box if errors occur when sending faxes overseas.
V.34 Mode: Select the check box to use the super G3 fax transmission mode. Select this check box
for ordinary operation; clear this check box only when communication is not possible due to the
mode of the recipient machine.
% You can specify the fax number registered in the address book of this machine using [Add from
Address Book]. For details, refer to page 4-5.
% You can specify the fax number registered in a phone book using [Add From Phone Book]. For
details, refer to page 4-4.
% Clicking [Register To Phone Book] registers the entered name and fax number in the "Simple Entry"
folder of the phone book.
7
Click [Add Recipients].
% To send a fax to multiple recipients, repeat Steps 6 and 7. You can register up to 100 recipients.
% To remove a registered recipient, use [Delete From List].
8
If necessary, to configure the fax mode details, click [FAX Mode Setting Details], and to specify the fax
cover sheet, select the "FAX Cover Sheet" check box.
% For details, refer to page 4-6.
9
Click [OK].
The fax data is sent via this machine.