3 installation using add printer wizard, 1 settings of this machine, Tcp/ip settings of this machine – Konica Minolta BIZHUB C652DS User Manual

Page 20: Raw port number setting of this machine, Lpd setting of this machine, 2 windows vista/server 2008, Installation using add printer wizard -9, Windows vista/server 2008 -9

Advertising
background image

bizhub C652/C652DS/C552/C552DS/C452

3-9

3.3

Installation using Add Printer Wizard

3

3.3

Installation using Add Printer Wizard

This section describes how to install the driver using network connection (LPR/Port 9100).

To use LPR/Port 9100 printing, specify the port while installing the printer driver.

d

Reference

For setup procedures for other network connection methods (SMB, IPP/IPPS, Web service print), refer to
"User's Guide [Print Operations]".

3.3.1

Settings of this machine

Before you can use this machine through the network connection, you must configure the network settings
for this machine.

TCP/IP settings of this machine

In "TCP/IP Settings" of this machine, specify the IP address.

d

Reference

For details on setting the IP address of this machine, refer to "User's Guide [Network Administrator]".

RAW port number setting of this machine

When using Port 9100 printing, in "TCP/IP Settings" of this machine, enable the RAW port number (initial
setting: "9100").

d

Reference

For details on specifying the RAW port number of this machine, refer to "User's Guide [Network
Administrator]".

LPD setting of this machine

Before using LPR printing, enable LPD printing in "LPD Setting" of this machine.

d

Reference

For details on "LPD Setting" of this machine, refer to "User's Guide [Network Administrator]".

3.3.2

Windows Vista/Server 2008

In Windows Vista/Server 2008, you can install the printer driver by searching for the printer on the network.

Reference

-

Installing the driver to Windows Vista/Server 2008-based computers requires the administrator
authority.

d

Reference

Since the printer is searched for during the installation, be sure to connect this machine to the network before
turning it on. For details on the network settings, refer to "User's Guide [Network Administrator]".

1

Insert the printer driver CD-ROM into the CD-ROM drive of the computer.

2

Click [Start], and then select "Control Panel".

3

Click "Printer" under "Hardware and Sound".

The "Printers" window appears.

% When "Control Panel" is displayed in Classic View, double-click "Printeres".

Advertising
This manual is related to the following products: