Konica Minolta BIZHUB C652DS - Manual (Page 29)

bizhub C652/C652DS/C552/C552DS/C452 3-18
3.4 Installing using plug and play 3
5
Under "Search for the best driver in these locations", select "Include this location in the search", and
then click [Browse].
6
Select a desired fax driver folder on the CD-ROM, and then click [Open].
% Select a folder according to the printer driver, operating system, and language to be used.
7
Click [Next], and then follow the instructions on the pages that follow.
% If the "Windows logo testing" or "Digital Signature" window appears, click [Continue Anyway] or
[Yes].
8
Click [Finish].
9
After finishing the installation, make sure that the icon for the installed printer is displayed in the
"Printers and Faxes" window.
10
Remove the CD-ROM from the CD-ROM drive.
This completes the fax driver installation.
3.4.3 Windows 2000
1
Connect this machine to the computer using a USB cable, and then start the computer.
NOTICE
During startup of the computer, do not unplug or plug the cable.
2
Insert the printer driver CD-ROM into the CD-ROM drive of the computer.
3
Turn on the main power of this machine.
"Found New Hardware Wizard" appears.
4
Select "Search for a suitable driver for my device (recommended)", and then click [Next].
5
Select "Specify a location", and then click [Next].
6
Click [Browse].
7
Select a desired fax driver folder on the CD-ROM, and then click [Open].
% Select a folder according to the printer driver, operating system, and language to be used.
8
Click [OK], and then follow the instructions on the pages that follow.
% If the "Digital Signature" window appears, click [Yes].
9
Click [Finish].
10
After finishing the installation, make sure that the icon for the installed printer is displayed in the
"Printers" window.
11
Remove the CD-ROM from the CD-ROM drive.
This completes the fax driver installation.