7 fax settings - header/footer position, 8 fax settings - line parameter setting (ip), Number of redials – Konica Minolta bizhub 552 User Manual
Page 239: Redial interval, 9 fax settings - tx/rx settings, 10 fax settings - function settings, Memory rx setting, Forward tx setting, Fax settings - header/footer position -34, Fax settings - tx/rx settings -34
bizhub 652/552
10-34
10.5
Administrator Settings (IP/I-FAX)
10
10.5.7
Fax Settings - Header/Footer Position
Reference
-
For IP Address Fax in the color mode, reception information is not available for [Outside Body Text].
Even if [Outside Body Text] is selected, sender information is added to the inside of the original.
d
Reference
For the setting procedure, refer to page 10-15.
10.5.8
Fax Settings - Line Parameter Setting (IP)
Number of Redials
d
Reference
For the setting procedure, refer to page 10-17.
Redial Interval
d
Reference
For the setting procedure, refer to page 10-17.
10.5.9
Fax Settings - TX/RX Settings
Reference
-
To enable the setting for [Print Paper Size], set [Tray Selection for RX Print] to [Auto].
-
The available tray types vary depending on the options that are installed.
-
To receive a fax in the color mode, documents are always recorded in full size for IP address fax, and
recorded after being reduced to the appropriate print paper size for Internet fax. These faxes are printed
in black and white.
-
To receive a fax in the color mode, Print Separate Fax Pages cannot be used.
d
Reference
For the setting procedure, refer to page 10-19.
10.5.10
Fax Settings - Function Settings
Function ON/OFF Setting - Destination Check Display Function
d
Reference
For the setting procedure, refer to page 10-21.
Memory RX Setting
d
Reference
For the setting procedure, refer to page 10-22.
Forward TX Setting
d
Reference
For the setting procedure, refer to page 10-23.