4 registering the basic information, 1 to begin operation, 1 environment and device requirements – Konica Minolta bizhub 552 User Manual
Page 49: 2 connection and settings of network cable, Connection of network cable, Registering the basic information, To begin operation -2, Environment and device requirements -2, 4registering the basic information
bizhub 652/552
4-2
4.1
To begin operation
4
4
Registering the basic information
This section explains the necessary settings and registrations before using the fax and scan functions of this
machine.
4.1
To begin operation
The following registrations are required in order to use this machine.
4.1.1
Environment and device requirements
The following environment and devices must be prepared to use various functions of this machine.
4.1.2
Connection and settings of network cable
To use the function of this machine that sends image data over the network, such as the Network Scan and
Network Fax functions, connection and settings of the network cable are required.
Connection of network cable
Connect a UTP cable (category 5 or later recommended) connected to the network to the Ethernet connector
on the machine.
Functions
Environment and device
Network scan function
•
Connection of network cable
•
Network settings
G3 fax function
•
Installation of the optional Fax Kit FK-502
•
Connection of modular cable
Network fax function
Internet Fax
•
Connection of network cable
•
Network settings
IP Address Fax
•
Installation of the optional Fax Kit FK-502
•
Connection of network cable
•
Network settings