Konica Minolta PageScope Net Care Device Manager - Manual (Page 109)

Device List 3
Device Manager 3-79
<Setting for Automatically Putting Device in Device Group>
The searched device can automatically be assigned to a device group based
on the specified conditions. For details, refer to "Setting for Automatically
Putting Device in Device Group" on page 3-94.
<Detail Settings>
SNMPv3 Settings Specify the settings (user name, context name, and port
number) to be used with the SNMPv3 protocol during an
SNMP broadcast discovery/SNMP unicast discov-
ery/SNMP multicast discovery. Using all added (specified)
settings, discovery is performed. SNMPv3 settings can be
added or deleted. To delete an IP address, select the check
box for the setting to be deleted.
For details on adding settings, refer to "Adding SNMPv3
settings" on page 3-85.
For details on deleting settings, refer to "Deleting settings"
on page 3-85.
Function Details
Function Details
(List of Settings for Automatically
Putting Device in Device Group) Displays a list of settings for automatically assigning a de-
vice to a device group.
The following items are displayed.
• Setting (displays whether the Setting for Automatically
Putting Device in Device Group is enabled or disabled)
• Device Group
• Description
Add Click this button to add a new setting for Automatically
Putting Device in Device Group.
Edit Click this button to edit the setting for the selected Auto-
matically Putting Device in Device Group.
Delete Click this button to delete the setting for the selected Auto-
matically Putting Device in Device Group.
Function Details
Register only application-support-
ed devices. Select this check box to register only our supported ones
of the searched devices in the device list.