Konica Minolta PageScope Net Care Device Manager - Manual (Page 130)

Device List 3
Device Manager 3-100
<Device Group Settings>
<Registration Settings>
Function Details
Apply the same setting as "Auto-
matically Putting Device in Device
Group" which is used when De-
vice Auto Discovery takes place. Select this check box when automatically adding a regis-
tered device to a device group with conditions specified.
Before using this function, you need to specify a setting for
automatically adding a device to a device group on the Set-
ting for Automatically Putting Device in Device Group page.
For details, refer to "Setting for Automatically Putting De-
vice in Device Group" on page 3-94.
Function Details
Device Single Registration Type in the IP address or DNS host name for the device to
be managed, obtain data for each device and register the
device in the device list.
IP Address /
DNS Host Name Type in the IP address or DNS host name of the device to
be registered.
2
Note
Use a global address for IPv6 address. Some
functions may not be available if any address
other than the global address is used.
Device Batch Registration Type in the IP address or DNS host name of the device to
be registered for a file, and import the file to register data.
File Path Type in the path to the file to be used for Device Batch Reg-
istration. The file path can also be specified by clicking the
[Browse] button.
Operation for Already
Existing Devices Select whether or not to overwrite the information in "IP Ad-
dress / DNS Host Name", "Registered Name", "Serial
Number", "Admin.Authority", "OpenAPI Setting", "Authen-
tication Settings", and "SNMP Settings" if there is already
an imported device with the same name.
Import the file which is
secured by password. Click this option to import a file with a password specified.
Select the [Import the file which is secured by password.]
check box, and then type in the password specified for the
file in [Password].
File Format Downloads a template of a file containing device informa-
tion that is used for Device Batch Registration. Settings are
specified for the required items in advance.
Click the [Download] button to save the file to the compu-
ter. For details, refer to "Downloading an import file format"
on page 3-104.
Virtual Device Registration Registers devices not connected to the network or of which
information cannot be obtained through the network.