Konica Minolta PageScope Net Care Device Manager - Manual (Page 131)

Device List 3
Device Manager 3-101
<SNMP Settings>
Function Details
SNMP Port Number Type in the SNMP port number to be used when "Device
Single Registration" or "Device Batch Registration" is se-
lected. The default is "161".
Communication by SNMPv1 Select this function to use SNMPv1.
Community Name Type in the community name to be used with SNMPv1.
Communication by SNMPv3 Select this function to use SNMPv3.
User Name Type in the user name to be used with SNMPv3.
Context Name Type in the context name to be used with SNMPv3.
Security Level Select "NoAuth/NoPriv", "Auth/NoPriv" or "Auth/Priv" as
the security level to be used with SNMPv3.
Authentication Protocol Select MD5 or SHA-1 as the authentication protocol to be
used with SNMPv3.
2
Reminder
The authentication protocol must be specified
when "Security Level" is set to "Auth/NoPriv" or
"Auth/Priv".
Authentication Pass-
word Type in the authentication password to be used with
SNMPv3.
2
Reminder
The password must be entered when "Security
Level" is set to "Auth/NoPriv" or "Auth/Priv".
Privacy Protocol Select "DES" or "AES-128" as the privacy protocol to be
used with SNMPv3.
2
Reminder
The privacy protocol must be specified when
"Security Level" is set to "Auth/Priv".
Privacy Password Type in the privacy password to be used with SNMPv3.
2
Reminder
The password must be entered when "Security
Level" is set to "Auth/Priv".