Konica Minolta PageScope Net Care Device Manager - Manual (Page 209)

User List 4
Device Manager 4-14
2
Click the [Display] button.
A list of devices registered in the selected group appears.
3
Select a device to be imported, and then click the [Execute] button.
Connecting to the device is attempted. If the connection is successfully
completed, the Select User page appears.
2
Reminder
If the connection fails, check the following: If the setting is incorrect, a
part of the information may be imported.
- Power supply of the device
- Device settings (FTP/HTTP/WebDAV)
- Settings on the "Device Information Settings" page for the Device List
2
Note
Use a global address for IPv6 address.
Some functions may not be available if any address other than the global
address is used.