Konica Minolta PageScope Net Care Device Manager - Manual (Page 110)

Device List 3
Device Manager 3-80
3.10.2 Specifying a network search range
To search for devices, the SNMP broadcast discovery, SNMP unicast
discovery, or SNMP multicast discovery can be specified. Specify a search
range depending on each search method.
Adding an SNMP broadcast discovery
Specify the broadcast address used for the SNMP broadcast discovery.
1
Click the [Add] button for "SNMP Broadcast Discovery".
2
Select a setting method.
– [Specify Broadcast Address]: Directly type in the broadcast
address.
– [Specify Subnet]: Type in the network address and subnet mask.
The broadcast address is automatically calculated from the typed
in address.
3
Specify the necessary settings, and then click the [Apply] button.
– To clear the entered information, click the [Clear] button.
Function Details
Specify Broadcast Address In the format "xxx.xxx.xxx.xxx", type in the broadcast ad-
dress to be searched for.