Konica Minolta PageScope Net Care Device Manager - Manual (Page 149)

Device List 3
Device Manager 3-119
Checking the import result
The results of the import operation can be viewed. Check the details, and
then click the [OK] button.
2
Reminder
* indicates item names that can be changed when "Display Settings" is
selected on the Server Settings page. For details, refer to "Display
Settings" on page 6-4.
Function Details
Result Displays whether the registration operation was success-
fully completed from importing.
• Registration Completed: The new registration was suc-
cessfully completed.
• Update: Appears when the information on "Model
Name", "Serial Number", "IP Address / DNS Host
Name", "Nickname*", "Location*", and "Contact Per-
son*" of the existing device name has been updated
successfully while "Overwrite" is specified for "Opera-
tion for Already Existing Devices".
• Cancel: Appears when no processing is performed be-
cause the same device name is already registered while
"Do not Overwrite" is selected in "Operation for Already
Existing Devices".
• Error: Appears when the entered data is inappropriate
and cannot be registered. Check again the contents of
the file to be imported. Note that if the registered name
or IP address/DNS host name as that of the imported vir-
tual device is already registered (used), the device can-
not be imported ("Error" is displayed).
Registered Name Displays the registered name for the device.
Model Name Displays the model name for the device.
Serial Number Displays the serial number for the device.
IP Address / DNS Host Name Displays the IP address or DNS host name for the device.
Nickname* Displays the nickname for the device.
Location* Displays the installation location for the device.
Contact Person* Displays the contact person for the device.