Konica Minolta bizhub C250P - Manual (Page 26)

Administrator Operations 2
C250P 2-9
Ad
minist
ra
to
r Op
er
at
ions
Chapter 2
Setting the EnhancedSecurity mode to “ON” changes the setting values of
the following functions.
2
Reminder
When Password Rules is set to “Enable,” the characters and the number
of digits used for each password are restricted. For details of Password
Rules, see “Password Rules” on page 1-11.
Function Name Factory Setting When EnhancedSecurity mode is set to [ON]
Password Rules Disable Enable (not to be changed)
Prohibit Setting Mode 1 Mode 2 (not to be changed)
Three times is set.
* In association with Secure Document Access
Method, the method is changed from authenti-
cation using Secure Document ID and pass-
word (Mode 1) to that using the password with
the secure document first narrowed down by
Secure Document ID (Mode 2).
SSL OFF ON (not to be changed)
FTP Server ON OFF (not to be changed)
SNMPv1/v2c Read/Write en-
abled Only Read is enabled (not to be changed)
SNMP v3 Security Level
and auth/priv-password auth/priv-pass-
word The security level can be selected from among
“auth-password” and “auth/priv-password.”
An 8-digit-or-more auth-password and priv-
password can both be set.
Data Capture Permit Prohibit (not to be changed)
Network Setting Clear Enabled Restrict
c250P_security_E.book 9 ページ ２００７年４月１０日 火曜日 午後７時２７分