Konica Minolta bizhub C250P - Manual (Page 41)

2 Administrator Operations
2-24 C250P
Ad
minist
ra
to
r Op
er
at
ions
Chapter 2
6
Make the necessary settings.
– To change a User Box Password, select the “User Box Password
is change.” check box.
? What precautions be used when entering the User Box Password?
% Enter a User Box Password that meets the requirements of the
Password Rules in the “New Password” box. For details of Pass-
word Rules, see “Password Rules” on page 1-11.
% In the “Retype New Password” box, enter the same User Box Pass-
word as that entered in the “New Password” box.
7
Click the [Apply].
? What happens if the User Box Password entered does not meet the
requirements of Password Rules?
% If the User Box Password entered does not meet the requirements
of the Password Rules, a message appears that tells that the User
Box Password entered cannot be used. Click [OK] to go back to the
screen of step 5. Perform steps 5 through 7 once again. For details
of Password Rules, see “Password Rules” on page 1-11.
? What happens if there is a mismatch in the User Box Passwords?
% If there is a mismatch in the User Box Password between that en-
tered in “New Password” and that entered in “Retype New Pass-
word,” a message appears that tells that there is a mismatch in the
User Box Password. Enter the correct User Box Password.
8
Click the [OK].
c250P_security_E.book 24 ページ ２００７年４月１０日 火曜日 午後７時２７分