Konica Minolta bizhub C250P - Manual (Page 90)

User Operations 3
C250P 3-5
Use
r Op
er
at
ions
Chapter 3
9
Press the [Menu/Select] key.
? What if there is a mismatch of the Secure Print Password relative to
the Secure Print ID?
% If there is a mismatch of the Secure Print Password relative to the
Secure Print ID, a message appears that tells that authentication
has not been successful. The machine then prohibits entry of the
Secure Print Password for 5 sec. Enter the correct Secure Print
Password.
% If “All” has been selected in step 6, the machine counts as unau-
thorized access any Secure Print Document, the Secure Print Pass-
word of which is a mismatch.
% If the EnhancedSecurity mode is set to “ON,” entry of a wrong Se-
cure Print Password is counted as unauthorized access. If a wrong
Secure Print Password is entered a predetermined number of times
(once to three times) set by the Administrator of the machine or
more, a message appears that tells that authentication has not
been successful for any subsequent operation for authentication.
The machine is then set into an access lock state, disabling access
to the Secure Print Document. To cancel the access lock state, the
Administrator of the machine must perform the Release Setting.
Contact the Administrator of the machine.
10
Press the [Menu/Select] key to start the print process.
– Press the [Cancel] key to go back to the screen shown in step 6.
!
Detail
If two or more Secure Print Documents, each having an identical Secure
Print ID and Secure Print Password, have been registered, multiple Se-
cure Print Documents can be printed at once.
c250P_security_E.book 5 ページ ２００７年４月１０日 火曜日 午後７時２７分