Konica Minolta bizhub C250P - Manual (Page 96)

User Operations 3
C250P 3-11
Use
r Op
er
at
ions
Chapter 3
6
Make the necessary settings.
– To change a User Box Password, select the “User Box Password
is changed.” check box.
? What precautions should be used when entering the User Box
Password?
% In the “Current Password” box, enter the currently set User Box
Password.
% Enter a User Box Password that meets the Password Rules require-
ments in the “New Password” box. For details of Password Rules,
see “Password Rules” on page 1-11.
% Enter the same User Box Password as that entered in the “New
Password” box in the “Retype New Password” box.
7
Click the [Apply].
? What if there is a mismatch in the Current User Box Passwords?
% If there is a mismatch in the Current User Box Passwords, a mes-
sage appears that tells that there is a mismatch in the Current User
Box Passwords. Click [OK] to go back to the screen of step 2. Per-
form steps 3 through 7 once again.
? What happens if the New User Box Password entered does not
meet the requirements of Password Rules?
% If the User Box Password entered in the “New Password” box does
not meet the requirements of the Password Rules, a message ap-
pears that tells that the User Box Password that has been entered
cannot be used. Click [OK] to go back to the screen of step 2. Per-
form steps 3 through 7 once again. For details of Password Rules,
see “Password Rules” on page 1-11.
c250P_security_E.book 11 ページ ２００７年４月１０日 火曜日 午後７時２７分