Konica Minolta bizhub C250P - Manual (Page 43)

2 Administrator Operations
2-26 C250P
Ad
minist
ra
to
r Op
er
at
ions
Chapter 2
5
Press the [+] and/or [,] key to enter the currently set 8-digit Adminis-
trator Password.
– Press the [*] or [)] key to move the cursor (digit).
– Press the [*] key to clear the value entered.
6
Press the [Menu/Select] key.
? What if an Administrator Password different from that is currently
registered is mistakenly entered?
% If there is a mismatch between the currently registered Administra-
tor Password and the Administrator Password entered, a message
appears that tells that there is a mismatch in the Administrator
Passwords. Enter the correct Administrator Password.
% If the EnhancedSecurity mode is set to “ON,” entry of a wrong
password is counted as unauthorized access. If a wrong Adminis-
trator Password is entered a predetermined number of times (once
to three times) set by the Administrator of the machine, the Utility
screen appears and the machine is set into an access lock state. To
cancel the access lock state, turn off, and then turn on, the main
power switch of the machine. When the main power switch is
turned off, then on again, wait at least 10 seconds to turn it on after
turning it off. If there is no wait period between turning the main
power switch off, then on again, the machine may not function
properly.
c250P_security_E.book 26 ページ ２００７年４月１０日 火曜日 午後７時２７分