Konica Minolta bizhub C250P - Manual (Page 93)

3 User Operations
3-8 C250P
Use
r Op
er
at
ions
Chapter 3
8
Click the [Apply].
? What happens if the User Box Password entered does not meet the
requirements of Password Rules?
% If the User Box Password entered does not comply with the Pass-
word Rules, a message appears that tells that the User Box Pass-
words entered cannot be used. Click [OK] to go back to the screen
of step 6. Perform steps 6 through 9 once again. For details of
Password Rules, see “Password Rules” on page 1-11.
? What happens if there is a mismatch in the User Box Passwords?
% If there is a mismatch in the password between that entered in the
“User Box Password” box and that entered in the “Retype User Box
Password” box, a message appears that tells that there is a mis-
match in the User Box Password. Enter the correct User Box Pass-
word.
? What steps should be performed to change User Box Attributes?
% For the procedure to change the User Box Attributes, see “Using
User Box Attribute Change” on page 3-9.
9
Check the message that tells that the setting has been completed.
Then, click [OK].
c250P_security_E.book 8 ページ ２００７年４月１０日 火曜日 午後７時２７分