1 check count clear conditions, Check count clear conditions -6 – Konica Minolta bizhub C250P User Manual
Page 11
1
Security
1-6
C250P
Security
Chapter 1
1.2.1
Check Count Clear Conditions
The following are the conditions for clearing or resetting the check count of
the number of wrong entries at the time of authentication by the Enhanced-
Security mode.
<Admin. Setting Mode>
-
Authentication of Admin. Setting mode is successful.
-
The machine is restarted.
<Secure Print>
-
Authentication of Secure Print is successful.
-
Release of Prohibit Functions When Auth. Error is executed.
-
The machine is restarted.
<Box>
-
Authentication of User Box is successful.
-
Authentication for execution of change of User Box Name and User Box
Password is successful.
-
Release of Prohibit Functions When Auth. Error is executed.
-
The machine is restarted.
<SNMP Password (auth-Password, priv-Password)>
-
Authentication of SNMP is successful.
-
Release of Prohibit Functions When Auth. Error is executed.
-
The machine is restarted.
c250P_security_E.book 6 ページ 2007年4月10日 火曜日 午後7時27分