Konica Minolta SD-501 - Manual (Page 29)

Selecting an Output Tray (continued)
2-7
4.
Touch OK on the Output Tray Selection Screen.
It will return to the Output Application Screen.
The output tray location is indicated by a depressed key on the front image
of the machine.
5.
Touch OK on the Output Application Screen.
It will return to the Copy Screen.
6.
Be sure to fully withdraw the Saddle stitcher tray, if selected as an
output tray.
Be careful not to exceed the tray capacity when selecting the print quantity,
otherwise unexpected trouble may be caused.