Konica Minolta SD-501 - Manual (Page 48)

05 Saddle Stitcher Adjustment (continued)
3-12
5 Check a distance (a) and distance (b) on the output sheet.
6 If the desired result cannot be obtained, touch the ADJUSTMENT tab.
7 Touch Next or Back to select the paper size to be adjusted.
Touching Next continuously will change the paper size as follows:
All Size - A4R - 8.5x11R
8 Touch Double Fold.
9 Use the touch panel keypad to enter the desired adjustment value, then touch
Set.
Available range: -50 to +50, 1 step = 0.1 mm
Note:
The distance (a) in step 5 will increase when the "+" value is entered, and
decrease when the "-" value is entered.
10 Touch Single Fold. Repeat step 9.
Note:
The distance (b) in step 5 will increase when the "+" value is entered, and
decrease when the "-" value is entered.
11 Repeat steps 3 to 10 until the desired result is obtained.
12 If adjustment in any other size is required, repeat steps 3 to 10.
13 Touch Return to restore the Saddle Stitcher Adjustment Mode Menu Screen.
a
b
[2]
[1]
Paper feed direction