Konica Minolta SD-501 - Manual (Page 45)

05 Saddle Stitcher Adjustment (continued)
3-9
04 Folding Position Adjustment
Perform this adjustment for the double-folding position processed by the SD-501
Saddle Stitcher.
Procedure
1 Touch Adjustment - 02 Finisher Adjustment - 05 Saddle Stitcher Adj.
2 Touch 04 Folding Position Adjustment to display the Folding Position
Adjustment Screen.
3 Touch the COPY tab to display the Copy Screen.
4 Load the desired size of paper to be adjusted on a tray, specify Multi Center,
then press [Start]. A sample pattern (No. 16) will be output.
5 Check the misalignment (a) of the edge of the feeding sheets.
6 If the desired result cannot be obtained, touch the ADJUSTMENT tab.
a
Paper feed direction