Konica Minolta SD-501 - Manual (Page 9)

Machine Configuration (continued)
1-5
External View
1 Secondary (Sub) tray of SD-501 Saddle Stitcher holds non-sorted sets output
from Saddle Stitcher.
2 Multi-folding mode outlet cover handle opens the cover to remove paper
misfed when using multi-folding mode.
3 Multi-folding mode tray holds sets output in multi-folding mode.
4 Secondary (Sub) tray holds non-sorted sets output from the machine on the
right side of the Saddle Stitcher.
5 Right side door of SD-501 Saddle Stitcher opens to remove mishandled
paper.
6 Saddle Stitcher tray is withdrawn when using Fold&Staple mode.
7 Dust box is withdrawn to remove waste paper.
8 Left side door of SD-501 Saddle Stitcher opens for staple supply or to remove
mishandled paper.
Internal View
1 Upper cover lever of Folding unit opens the upper cover to remove paper
misfed inside the Folding unit.
2 Secondary (Sub) tray conveyance lever (middle) opens downward to remove
mishandled paper.
3 Folding unit drawer handle opens the drawer to remove paper misfed inside
the Folding unit.
4 Secondary (Sub) tray conveyance lever (right) opens upward to remove
mishandled paper.
5 Inlet lever opens leftward to remove mishandled paper.
6 Feeding knob can be turned clockwise to feed mishandled paper to the Folding
unit.
7 Folding unit conveyance lever opens rightward to remove mishandled paper.
8 Folding unit conveyance cover handle opens the cover to remove mishandled
paper.
9 Folding unit front cover lever opens upward to remove mishandled paper.
10 Stapling unit staples folded sets.
11 Stapling unit knob can be turned clockwise to feed mishandled paper.
12 Outlet lever opens leftward to remove mishandled paper.
13 Outlet conveyance lever opens downward to remove mishandled paper.