Konica Minolta SD-501 - Manual (Page 51)

05 Saddle Stitcher Adjustment (continued)
3-15
8 Use the touch panel keypad to enter the desired adjustment value, then touch
Set.
Available range: -400 (wide) to +400 (narrow), 1 step = 0.1 mm
9 Repeat the adjustment steps from 3 to 8 until the desired result is obtained.
10 If adjustment in any other paper size is required, repeat steps from 3 to 8.
11 Touch Return to restore the Saddle Stitcher Adjustment Mode Menu Screen.
• Enter the value so that the cover should be cut more than 2.0 mm.
• If “All Size” is selected as paper size, the entered adjustment value will be
applied to all sizes. If specific paper size is selected, adjustment value will
be the sum of the entered value and the value previously specified for “All
Size”.