Konica Minolta SD-501 - Manual (Page 43)

05 Saddle Stitcher Adjustment (continued)
3-7
03 Staple Pitch Adjustment
Perform this adjustment for the staple pitch processed by SD-501 Saddle Stitcher.
Procedure
1 Touch Adjustment - 02 Finisher Adjustment - 05 Saddle Stitcher Adj.
2 Touch 03 Staple Pitch Adjustment to display the Staple Pitch Adjustment
Screen.
3 Touch the COPY tab to display the Copy Screen.
4 Load the desired size of paper to be adjusted on a tray, specify Fold&Staple,
then press [Start]. A sample pattern (No. 16) will be output.
5 Check the staple pitch (a) of the sample sheet.
a