Konica Minolta SD-501 - Manual (Page 25)

2-3
Adjusting Position of Copy Image (Image Shift)
Use Image Shift to adjust the position of copy images, e.g. for the purpose of
creating a new binding margin on originals to make it easier for filing purposes.
Page Space function is available only when Booklet or 2 Repeat mode of Repeat has
been already selected. Use this function to make the desired amount of blank space
between the two images on a page. See the illustration on p. 2-5 for details.
If image loss is likely, select the Reduce & Shift mode instead of regular Image shift.
See p. 11-51 of User’s Guide (Copier).
Specifications for Image Shift
❒ Shift amount: 0 to 250 mm in 1 mm increments
❒ Setting in 0.1mm increments using up/down arrow key is also available. This
setting change can be made on the Utility Menu Screen.
1.
Select the copy mode and paper size from the Copy Screen, as
required.
2.
Touch Application on the Copy Screen.
When starting a new copying job, be sure to close the ADF securely, then
press [Reset].
Original
Copies
Up
Up
Down
Down
Left
Left
Right
Right